SETUP SHEET FOR THE RC10B3

date      1-4-98
driver   Ryan Roberts
track    Valley R/C Race Park, Hemet, CA

FRONT SUSPENSION
Front Block Carrier (caster setting): 30°
Steering Block STD

Camber -2 deg.
Steering Ackerman: STD (back)

Toe-in: 0°
Toe-out: 0° Antiroll bar: none

FRONT SHOCKS

1 middle
2 outside
3 inside

FRONT SHOCKS
STD
Clamp to Cap dist: 1/2"

Limiters, inside none
Limiters, outside none

Oil 30wt Shaft STD .71"
Piston #1 Spring green
Body STD

REAR SUSPENSION
Susp mounts: 3-3
Wheel Hub: STD
Rear Ride Height: dogbones level
Anti-squat: 1 washer under mount

Camber -2 deg.
Toe-in: 0°
Toe-out: 0°

Wheel Hub Placement

#1 Antiroll bar: none

REAR SHOCKS

1 middle
2 inside
3 outside
4 outside

REAR SHOCKS
STD
Clamp to Cap dist: 1/4"

Limiters, inside none
Limiters, outside none

Oil 25 wt    Piston #1
Spring silver    Shaft 1.02"
Body   STD

Front Tires Pro-Line 4 Ribbed M3 Foam STD
Rear Tires Pro-Line XTR Flat Stubbies Foam STD
Front Wheels 1 piece
Chassis STD
Radio XL2P Spd. Cntl Cyclone Servo Hi-tech

Motor FireHawk Stock Pinion 24
Spur Gear 81
Slipper STD
Battery Type Orion 1700 matched
Placement Middle

Track Description: Track was a little damp due to rain between races. Track is normally dry and loose and I use this same set-up.

Race Comments: Class: Stock A-Main Buggy. 1st place.

Buggy Comments: I felt my B3 is a lot stabler than my B2. I really like the way it handles. This was my first race at the Hemet track with my B3. I will be recommending it to everyone.