SETUP SHEET FOR THE RC10B2

 date _________ driver _______________________ track __________________________
FRONT SUSPENSION
Front Block Carrier (caster setting):
15° 20° 25° 30°
Front Ride Height: ____________
Steering Block _______________ Camber ________		 Toe-in: ________° Toe-out: _______° 1 outside inside other (draw) 2outside inside
FRONT SHOCKS
STD other
Clamp to collar dist. _______		 Limiters, inside _______
Limiters, outside _______		 Oil ____________ Shaft __________
Piston ___________ Spring ___________
Body ____________
REAR SUSPENSION
Susp mounts: 2° 3°
Wheel Hub: 0° 1.5° 3°
Rear Ride Height: __________
Anti-squat: STD other
Camber _______		 Wheel Hub Placement 1 2 3
1 outside middle inside other (draw)
2outside inside other (draw)
3 outside inside other (draw)
REAR SHOCKS
STD other
Clamp to collar dist. _____		 Limiters, inside _______
Limiters, outside _______		 Oil ____________ Shaft __________
Piston ___________ Spring ___________
Body ____________
Front Tires _______________ Foam _________
Rear Tires _______________ Foam _________
Front Wheels 1 piece 3 piece other
Chassis STD short graphite
Radio ________ Spd. Cntl _________ Servo __________		 Motor _________ Pinion ________
Spur Gear ______ Oil __________
Driveshafts _____________________
Slipper STD Hydra Viscuos
Slipper setting: STD looser tighter
Battery Type ____________
Placement Front Middle Rear
Off Road Track Conditions, circle all that apply:
smooth / bumpy
hard packed clay -- wet / dry / dusty
sandy -- wet / dry / dusty
soft dirt -- wet / dry / dusty
grassy -- wet / dry / dusty
wet / damp
other: _____________________________________

__________________________________________
high / medium / low traction
artificial (describe): __________________________		 Race Comments:
Vehicle Comments:

8/27/98