SETUP SHEET FOR THE RC10B3

date ________ driver ________________ track _____________________

FRONT SUSPENSION
Front Block Carrier (caster setting): 25° 30°
Steering Block: __________

Camber:_____
Steering Ackerman: STD (top) optional (bottom)
ackerman.jpg (6982 bytes)

Toe-in: _________°
Toe-out: ________° Antiroll bar:
thick
thin
none
other Weight in bulkhead: ________

FRONT SHOCKS b3frshok.gif (4595 bytes)

1 outside middle inside
other (draw)
2outside inside
3 outside inside other (draw) 4 Bump Steer _____________

FRONT SHOCKS
STD other
Clamp to Cap dist: ____________

Limiters, inside _____
Limiters, outside _____

Oil _________ Shaft ________
Piston ______ Spring ________
Body ___________________

REAR SUSPENSION
Susp mounts:2-3 3-3 3-0
Wheel Hub: STD other
Rear Ride Height: ________
Anti-squat: STD 3°
other: ________

Camber ________

Wheel Hub Placement

1 2 3 Antiroll bar: thick thin none
other

REAR SHOCKS
STD other
Clamp to Cap dist: ____________

Limiters, inside _____
Limiters, outside _____

Oil ________ Piston ________
Spring ______ Shaft _________
Body ______

Front Tires ____________________ Foam ________
Rear Tires ____________________ Foam ________
Front Wheels 1 piece 3 piece other
Chassis STD short long graphite
Radio ________ Spd. Cntl ________ Servo ________

Motor ________________ Pinion ________
Spur Gear ________ Oil __________
Driveshafts ________________
Slipper STD Hydra Viscuos
Slipper setting: STD looser
tighter
Battery Type ________________
Placement Front Middle Rear

Off Road Track Conditions, circle all that apply: smooth / bumpy hard packed clay -- wet / dry / dusty sandy -- wet / dry / dusty soft dirt -- wet / dry / dusty grassy -- wet / dry / dusty wet / damp other: _____________________________________ __________________________________________ high / medium / low traction artificial (describe): __________________________	Race Comments:
	Vehicle Comments:

8/25/98