SETUP SHEET FOR THE RC10T3

date _________ driver _______________________ track __________________________

FRONT SUSPENSION
Front Block Carrier (caster setting):25° 30°
Front Ride Height: _____________
Steering Block ________________
Weight in Bulkhead: _________

Camber ____________ Steering Ackerman:
STD (top) optional (bottom)
ackerman.jpg (6982 bytes)

Toe-in: ________°
Toe-out: _______°

1 outside inside other (draw)
2outside middle inside
3 outside middle inside 4 Bump Steer _____________

FRONT SHOCKS
STD other
Limiters, inside _____
outside _____

Oil _______ Shaft _______
Piston ____ Spring _______
Body __________________
Clamp to cap dist.: _________

Front antiroll bar: thick thin none other

REAR SUSPENSION
Susp mounts:2-3 3-3 3-0
Rear Ride Height: __________
Anti-squat:
STD 3 deg. ________

Camber ________

Wheel Hub Placement

1 2 3

Rear antiroll bar: thick thin
none other

REAR SHOCKS
STD other
Clamp to cap dist.: _____________

Limiters, inside _______
Limiters, outside _______

Oil ________ Shaft __________
Piston ____ Spring ___________
Body ____________

Front Tires _______________ Foam _________
Rear Tires _______________ Foam _________
Front Wheels 1 piece 3 piece other
Chassis STD other
Radio ______________ Spd. Cntl _________
Servo __________

Motor _________ Pinion ____
Spur Gear ______ Oil __________
Driveshafts ________________
Slipper STD Hydra Viscuos
Slipper setting: STD looser tighter
Battery Type ____________
Placement Front Middle Rear

Off Road Track Conditions, circle all that apply: smooth / bumpy hard packed clay -- wet / dry / dusty sandy -- wet / dry / dusty soft dirt -- wet / dry / dusty grassy -- wet / dry / dusty wet / damp other: _____________________________________ __________________________________________ high / medium / low traction artificial (describe): __________________________	Race Comments:
	Vehicle Comments:

8/25/98