STANDARD SETUP FOR THE RC10T3

date _________ driver _______________________ track __________________________

FRONT SUSPENSION
Front Block Carrier (caster setting):

30°
Front Ride Height: arms level
Steering Block inline
Weight in Bulkhead: none

Camber -2 deg.

Ackerman: STD

Toe-in: 0°
Toe-out: 0°

outside
2

middle
3

middle

FRONT SHOCKS

STD
Limiters, inside 0
outside 0

Oil 30wt Shaft 1.02
Piston #2 Spring green
Body 1.02
Clamp to cap dist.: snug

REAR SUSPENSION
Susp mounts:

3-3
Rear Ride Height: universals level
Anti-squat:

STD 3 deg.

Camber -2 deg. rear toe-in 3 deg.

Wheel Hub Placement

REAR SHOCKS

STD
Clamp to cap dist.: 9/32"

Limiters, inside 0
Limiters, outside 0

Oil 30 wt Shaft 1.32
Piston #1 Spring green
Body 1.39

Front Tires Pro-Line Edge Foam Pro-Line
Rear Tires Pro-Line Holeshot Foam Pro-Line
Front Wheels

1 piece
Chassis

STD
Radio ______________ Spd. Cntl _________
Servo __________

Motor _________ Pinion ____
Spur Gear ______ Oil __________
Driveshafts CVD's
Slipper

STD Hydra Visco
Battery Type _6 cell
Placement

Rear