RC10GT Kit
RC10GT Kit
This vehicle has been discontinued.

RC10GT Bearing Kits


These bearing kits come loaded with high-performance features for high-performance competition, with hard anodized shocks, MIP CVDs and ball bearings throughout the truck, distinguishing it from the bushing kits. The Engine Installation Packs also include ball bearings for the clutch. We have versions for both pull start and non pull start engines. The clutch is tuneable so you can adjust it to different conditions or tracks. It also includes an Associated-designed constant-pressure, quick fill fuel tank, single disk brake, and adjustable engine mounts. This truck has the same handling and performance characteristics as our race-winning electric RC10T series truck, but with the run time and power of nitro. Helpful engine tuning video included.

#7060 RC10GT Basic Team Truck Kit $362.00
Basic ball bearing kit with rolling chassis kit and body, hard anodized shocks, and rear universal driveshafts. Requires the addition of your favorite .12ci/.15ci engine (with or without pull start) and radio system to complete. (NOTE: also requires one of the Associated Engine Installation Packs to complete assembly).

#7065 RC10GT Bearing Kit (for pull start engines) $445.00
For pull start engines. Complete ball bearing kit with hard anodized shocks and rear universal driveshafts. Requires the addition of your favorite .12ci/.15ci engine (with or without pull start) and radio system to complete. (NOTE: Associated Engine Installation Packs included in kit).

#7066 RC10GT Bearing Kit (for non pull start engines) $445.00
For non pull start engines. Complete ball bearing kit with hard anodized shocks and rear universal driveshafts. Requires the addition of your favorite .12ci/.15ci engine (with or without pull start) and radio system to complete. (NOTE: Associated Engine Installation Packs included in kit).

#7076 RC10GT Team Truck with Dynamite TNT .12 size non pull start engine $555.00
Complete ball bearing Team Truck kit with Dynamite TNT .12 size non pull start engine, Engine Installation Pack, hard anodized shocks, rear universal driveshafts, and engine tuning video. Requires a radio system to complete.

RC10GT Bushing Kits


This easy-to-assembled kit comes with a helpful VHS video, How to Tune Your RC10GT Engine. It includes many of the features of the ball bearing version, and all the race-winning standards of the RC10T electric truck. Affordable for the entry-level racer, the RC10GT bushing kit can be easily upgraded to the race-winning ball bearing version by adding ball bearings, PTFE-coated shocks, and rear universal driveshafts for the ultimate in 1:10 scale gas truck performance.

#7050 RC10GT Basic Sport Truck $250.00
Basic bushing rolling chassis kit and body, gold anodized shocks, and dogbone driveshafts. Requires the addition of your favorite .12ci/.15ci engine (with or without pull start) and radio system. (NOTE: also requires one of the Associated Engine Installation Packs to complete assembly).

#7055 RC10GT Bushing Kit (for pull start engines) $320.00
Complete bushing kit with gold anodized shocks and dogbone driveshafts. Requires the addition of your favorite .12ci/.15ci engine and radio system. (NOTE: Associated Engine Installation Pack included in kit).

#7056 Complete Sport Truck with Dynamite TNT .12 size pull start engine $440.00
Complete bushing kit with Dynamite TNT .12 size pull start engine, gold anodized shocks, dogbones, Engine Installation Pack, and engine tuning video. Requires a radio system to complete.

Engine Installation Packs


Engine packages are currently set up for .12 sizes gas engines such as the Dynamite TNT, Yokomo RX, and O.S. Max CZR or CZZ, pull start and non pull start models.

BE SURE TO SPECIFY YOUR TYPE OF ENGINE ON THE ORDER FORM.

Engine Installation Packs include:
engine mount adapters
flywheel
clutch assembly (clutch bell, clutch bearings or bushings, clutch shoes, clutch spring, and clutch nut with clip)
exhaust manifold and tuned pipe muffler
silicone exhaust tubing and fuel line tubing
air filter
boot and foam prefilter
engine mount adapters
VHS video, "How to Tune Your RC10GT Engine."

For O.S. Max CZR, Dynamite TNT and Yokomo .12 size engines.
#7680 Engine Installation Package with bushing clutch for pull start engine. For RC10GT kit #7050.
#7681 Engine Installation Package with ball bearing clutch for pull start engine. For RC10GT kit #7060.
#7683 Engine Installation Package with ball bearing clutch for non pull start engine. For RC10GT kit #7060.