Videos » Tech Tips

Big Bore Shock Installation Tips
Richard Saxton shows you how to clearance your shock towers to except the NEW 12mm Big Bore shocks.

Part 1 of 2. Getting Started with your Replay XD1080.
This video will give you the basics on how to operate your Replay XD1080.

Part 2. Getting Started with your Replay XD1080
Replay XD covers some of the advanced settings and features of the XD 1080 camera.

Tech Tips - SC10 4x4 Introduction
Welcome to the SC10 4x4 tutorial video series. Take a brief tour here of the SC10 4x4, and see what topics will be covered in these tutorials.

Tech Tips - SC10 4x4 Servo Installation and Alignment
The SC10 4x4 comes with a unique servo alignment tool to ensure proper bump steer. See how to use this tool here.

Tech Tips - SC10 4x4 Servo Horn Alignment
It is important to center your servo horn. See how this is done here.

Tech Tips - SC10 4x4 Transmission Assembly
Learn how to assemble and grease the transmission in the SC10 4x4.

Tech Tips - SC10 4x4 CVA Assembly
Learn how to build your CVA's for max efficiency and life on the SC10 4x4.

Tech Tips - SC10 4x4 Tie Rod Tips & Tricks
Learn the little tricks to make tie rod assembly and disassembly quicker and easier.

Tech Tips - SC10 4x4 Freely Moving Parts
The key to a proper handling car is making sure that all parts move freely and that nothing is bound up. This video explains what to look for when building your SC10 4x4.

Tech Tips - SC10 4x4 Shock Build
Learn the proper way to build the shocks on your SC10 4x4.

Tech Tips - SC10 4x4 Belt Maintenance
The belt on the SC10 4x4 is very easy to install and remove if you do this little trick.