Team Associated News

September 26, 2018
NEW! FT Cross Pins for the RC8B3.1 and RC8T3.1 V3 Diff

NEW! FT Cross Pins for the RC8B3.1 and RC8T3.1 V3 Diff (has videos)

Category: Latest Products

Use this cross pin and insert set on RC8 V3 differentials to increase consistency, performance, and lifespan of the diff. Steel cross pin inserts reduce diff case deformation by increasing the contact area with the diff case, improving the internal gear mesh. Hard anodized aluminum cross pins are light and...

September 24, 2018
New! REFLEX 14T Truggy RTR

New! REFLEX 14T Truggy RTR

Category: Latest Products

Team Associated's 1:14 scale REFLEX 14T 4WD electric truggy comes out of the box already assembled, with a Reedy Power brushless speed control, brushless motor, high-torque digital steering servo, and 2.4GHz radio system. With all that power at your disposal, the truggy's design effortlessly channels it into 4WD fun! The...

September 24, 2018
New! REFLEX 14B RTR

New! REFLEX 14B RTR

Category: Latest Products

Team Associated's 1:14 scale REFLEX 14B RTR electric buggy comes out of the box already assembled, with a Reedy Power brushless speed control and motor, high-torque digital steering servo, and 2.4GHz radio system. With all that power at your disposal, the buggy's design effortlessly channels it into 4WD fun! The...

September 21, 2018
New! Reedy 2018 Trucker Hat

New! Reedy 2018 Trucker Hat

Category: Latest Products

This open mesh flatbill style hat keeps the sun at bay while allowing fresh air circulation and cooling. An adjustable snap strap means one-size-fits-all for any Reedy fan.

September 20, 2018
New! B6.1 Aluminum Differential Height Inserts

New! B6.1 Aluminum Differential Height Inserts

Category: Latest Products

Replace your standard diff height adjusters with these long-lasting aluminum versions. Orientation numbers are etched onto the inserts, making them easy to read. Compatible with RC10B6.1, RC10B6.1D, RC10B6.1 FL, RC10T6.1, and RC10SC6.1...

September 12, 2018
AE/Reedy Powered wins all 2WD classes at the Victorian Drivers Series final

AE/Reedy Powered wins all 2WD classes at the Victorian Drivers Series final

Category: Race Results

AE buggies took victories in all 2WD classes of the 2018 Victorian Drivers Series following the fourth and final round. Held at the Keilor club in Melbourne, Australia, this event was held in memory of Mark Polistena, the life member and long-standing president of the club who passed away in...

September 10, 2018
Myron Battman Kinnard TQs and Wins SIRC

Myron Battman Kinnard TQs and Wins SIRC

Category: Race Results

Fresh off his TQ and win in Daytona, Florida's Bash at the Beach in June, the Battman made his way to the 2018 Summer Chill Shoot-Out Championship to showcase the Team Associated and Reedy Powered products. At Southern Indiana Raceway (SIRC), Team Associated and Reedy Powered driver Myron "Battman" Kinnard...

September 7, 2018
Team Associated Wins Six at Pro-Line Surf City

Team Associated Wins Six at Pro-Line Surf City

Category: Race Results

The 2018 Pro-Line Surf City Classic is now in its 11th year and is one of the more relaxed, "big" races of the year. Hosted by OCRC Raceway in Huntington Beach, CA, the event took place over Labor Day weekend, which unofficially marks the end of summer. Fresh off the...

September 7, 2018
NEW! Blackbox 600Z ESC / Sonic 540-FT 21.5 Combo

NEW! Blackbox 600Z ESC / Sonic 540-FT 21.5 Combo

Category: Latest Products

Reedy's Blackbox 600Z Zero-Timing Sensored Brushless Competition ESC and Sonic 540-FT motors are the perfect solution for entry-level competition, thanks to their economical price, versatility, and race-proven performance. This pairing also offers an excellent solution for clubs and tracks that are looking to improve entry-level participation or introduce cost-controlled classes...

August 30, 2018
2019 Reedy International Off-Road Race of Champions Announced

2019 Reedy International Off-Road Race of Champions Announced

Category: Announcements

2019 Reedy International Off-Road Race of Champions Announced

Reedy is pleased to announce the 2019 Reedy International Off-Road Race of Champions will continue for a fifth consecutive year at OCRC Raceway in Huntington Beach, CA from January 24-27, 2019.

At the top of many racers must attend list, the atmosphere...

August 29, 2018
New! RC10B6.1 Factory Lite Kit

New! RC10B6.1 Factory Lite Kit

Category: Latest Products

Champions by design. 1:10 scale 2WD off road has been Team Associated's signature class since the release of the RC10 in 1984. The Team Associated RC10 buggy series has won 12 of the 17 I.F.M.A.R. World Championships contested since the racing class began. In fact, Team Associated has won more...

August 24, 2018
NEW! FT Graphite Servo Plate

NEW! FT Graphite Servo Plate

Category: Latest Products

Weighing just 5 grams, this Factory Team graphite servo tray installs under your servo for added bling. It fits the B6.1, B6.1D, SC6.1, and T6.1.

August 24, 2018
Kyle McBride Wins the Australian Nationals on Round 3 with his RC8B3.1

Kyle McBride Wins the Australian Nationals on Round 3 with his RC8B3.1

Category: Race Results

Over the weekend we attended the third and final round of the Australian Nationals Series. After already winning the first two rounds, I was looking forward to securing the final victory to take the overall series with my Team Associated B3.1!

The organizers in Townsville had put in an amazing effort...

August 24, 2018
AE/Reedy Power Champions Crowned at the Transylvania Off-Road Cup 2018

AE/Reedy Power Champions Crowned at the Transylvania Off-Road Cup 2018

Category: Race Results

After an intense three rounds, the battle was still on for most of the titles in the Transylvania Off-Road Cup 2018.

In 2WD Buggy 13.5, Jakab Laszlo already had won the title, winning three races in a row, ensuring another championship for the B6D model. The rest of the racers...

August 24, 2018
AE scores 5-way sweep of the R.O.A.R. 1:10 Electric Offroad Nationals

AE scores 5-way sweep of the R.O.A.R. 1:10 Electric Offroad Nationals

Category: Race Results

With eight titles on the line and racers competing for Team Associated in all the categories, the #WeAreAE team was well represented. The most coveted title of the weekend is always the 2WD Modified Buggy class where Team Associated/Reedy Power and hometown star, Spencer Rivkin, took the top qualifying position...

August 23, 2018
NEW! Anti-roll Bar Sets for the SC6.1 and T6.1

NEW! Anti-roll Bar Sets for the SC6.1 and T6.1

Category: Latest Products

Adding anti-roll bars to your SC6.1 or T6.1 will help minimize chassis roll on high-traction surfaces, making the vehicle more responsive in cornering and more stable.

The #71134 Anti-roll Bar Hardware contains all the parts needed to mount both front and rear bars. Each front and rear set has three...

August 6, 2018
Sizzling Victories for AE at Bring the Heat

Sizzling Victories for AE at Bring the Heat

Category: Race Results

Bring the Heat at Flowood RC brought in 170+ entries and plenty of competition from Mississippi and surrounding states. Team Associated and Reedy drivers William Ables and Drew Spurgeon brought home some good finishes on the highly technical track.

Drew Spurgeon traveled from Arkansas to compete in the 40+ 1/8...

August 1, 2018
NEW! TC7.2 Factory Team Kit

NEW! TC7.2 Factory Team Kit

Category: Latest Products

1:10 Scale Electric On-Road Race Car

Team Associated is proud to announce their newest 1:10 scale 4WD electric touring car kit, the TC7.2 Factory Team Kit, the next generation in the TC7 lineage.

With current touring car platforms reaching higher plateaus of precision and performance, the engineers behind the doors...

July 31, 2018
NEW! Factory Team Body Reamer

NEW! Factory Team Body Reamer

Category: Latest Products

Make short work of creating body mounting holes! This reamer with sharp tip includes hole diameters along the tip so you know when to stop.

July 30, 2018
NEW! Factory Team Titanium Top Shaft Screw

NEW! Factory Team Titanium Top Shaft Screw

Category: Latest Products

This new top shaft screw replaces the stock steel version found in the B6.1, B6.1D, T6.1, and SC6.1 Team Kits. It reduces the rotating weight and comes with preinstalled pin for easy assembly.

Compatible with layback, laydown, and standup gearboxes when using the slipper clutch. Weighs 40% less than the...


Warning: Unknown: write failed: No space left on device (28) in Unknown on line 0

Warning: Unknown: Failed to write session data (files). Please verify that the current setting of session.save_path is correct (/tmp) in Unknown on line 0